(Photo Credit: Google Maps)
Cycling is a great workout and can make for a healthy and cheap alternative to driving a car or using public transport to get around. Riding a bike is good for traffic, good for health, and good for the environment, but it does not come without its own set of risks. There are many things that both motorists and cyclists can do to make sure everyone shares the road safely and courteously.
- Watch for bikes when opening doors. Passengers and drivers blindly opening doors into bike lane can cut off a cyclist, causing a crash between the cyclist and the door, or force them to dangerously steer into motor vehicle traffic. In most states, opening doors into traffic establishes fault if doing so results in an accident.
- Share the road. Give bikes space, especially on crowded streets. Only pass when there is enough room to do so safely and never tailgate a person on a bike.
- Check for cyclists when turning or pulling over to the side of the road. Motorists may not always think to check the right side of the car when turning or pulling over to the right, but a bike may be approaching. Treat bike lanes like another lane of traffic.
- Do not park in bike lanes. Aside from being a fineable offense, this forces cyclists into motor vehicle traffic.
- Always use your headlights – even during the day. Using your headlights at all times helps other road users see your vehicle better, especially in inclement weather.
- Get off the phone. This should go without saying and applies whether cyclists are present or not, and sharing the road with cyclists requires extra attention. Distracted driving is a major cause of accidents.
- Always wear a helmet – while this may only be a legal requirement for those under 16, this should be rule number one for all riders. The leading part of the body to fly forward off of a bike in a crash is usually the head and bike helmets can reduce the risk of head injury by 60%.
- Know the rules of the road. Cyclists must follow the same rules as motorists and can be cited for things such as running red lights, not yielding for pedestrians in crosswalks, and heading the wrong way down a street.
- Always use your headlights and taillights at night and make sure they are the correct color (white for front, red for back), and clearly visible from a distance of at least 600 feet. Reflectors must be present on both the front and back sides of the pedals or on the ankles of the rider.
- Wear highly visible clothing, especially at night.
- Never ride on limited access highways such as interstates. These roads are marked with signage at onramps prohibiting bicycles.
- Cyclists must yield to pedestrians, especially when riding on sidewalks (not all towns and neighborhoods allow bike riding on public sidewalks). When passing a pedestrian, cyclists should use an audible warning such as a bell or verbally calling out to the pedestrian.
- Use hand signals to indicate the intention to stop, turn, or change lanes.
(Photo Credit: iStock)
Every May, the NHTSA and state governments come together to coordinate Motorcycle Safety Awareness Month, which strives to spread awareness about motorcycle laws and education designed to keep everyone on the road safe. The number of deaths and injuries caused by accidents involving motorcycles is staggering, and many of these are caused by non-motorcycle users of the road. It’s important to understand safety issues facing motorcycles in traffic, regardless of whether your vehicle has two wheels or more. Below is a list of safety tips you should familiarize yourself with before your next ride:
- Always wear a DOT-compliant helmet while riding. You are much more likely to experience severe brain damage caused by head trauma in a crash if you are wearing a non-compliant helmet.
- Wear brighter, more reflective gear, especially while traveling at night, and make sure your lights are functioning, bright, and visible (unblocked).
- Lane splitting may help save time and avoid getting rear-ended in heavy traffic, but it can also be very dangerous and illegal. If you’re going to filter forward, make sure it is done safely, with courtesy, and only where it is legal.
For Other Road Users:
- Because motorcycles are smaller than cars and trucks, they can be more difficult to spot, especially in blind spots. Always check your blind spots & mirrors, use your turn signals, and use extra care when you know motorcycles are nearby.
- Give more following distance to motorcycles. This gives motorcyclists room to perform emergency stops or maneuvers for road hazards like gravel, potholes, standing water, cracks, or train tracks that passenger vehicles can usually continue over at reduced speed.
- Share the road with motorcyclists, but not the lane. Motorcyclists should always get a full lane width, even if it may look like there is room for a car.
- Never operate any vehicle while under the influence of drugs or alcohol.
- Leave the phone in your pocket and just focus on the road. Distracted driving is a leading cause of accidents for motorists, cyclists, and pedestrians alike.
- Take time to rest during long trips so you stay alert, awake, and ready for the road ahead.
You can learn more about Motorcycle Safety Awareness Month at the NHTSA’s website.
(Photo Credit: Ford Motor Company)
Yesterday the U.S. Department of Transportation (National Highway Traffic Safety Administration) and the Insurance Institute for Highway Safety announced that twenty of the world’s largest car manufacturers pledged to make automatic emergency braking (AEB) systems standard on all of their new vehicles starting no later than September of 2022. The NHTSA estimates that this commitment from automakers will make AEB systems standard three years sooner than through a formal regulatory process. The IIHS estimates that during those three years, standard AEB systems will prevent 28,000 rear-end collisions and 12,000 resulting injuries.
Automatic Emergency Braking is a forward collision mitigating safety feature that helps prevent or reduce the severity of collisions. AEB integrates radar/laser and cameras along with a computer that gauges a vehicle’s speed relative to an object (a slower or stopped vehicle, pedestrian, cyclist, etc.) in front of it. In the event of an imminent forward collision, the car’s AEB system warns the driver of the possible collision, using alert sounds, lights, and/or tactile feedback such as vibrating the steering wheel.
If the system detects that the driver is not doing enough to avoid hitting the object, i.e. the driver may be distracted, fatigued, or experiencing a medical problem, AEB will apply the brakes to stop the vehicle, ideally with enough time to avoid the collision, or at least greatly reduce its severity.
Currently, AEB systems are available on about a quarter of new cars, and the NHTSA now considers automatic braking in its 5-Star ratings. The IIHS requires new vehicles to come with AEBs in order to qualify for a Top Safety Pick+, the highest award possible. According to the IIHS, vehicles with an AEB system are 14 percent less likely to experience a forward collision than vehicles that do not have it equipped.
You can read the official press release about the automaker AEB commitment on the NHTSA’s website.
If this coming winter’s temperatures are even half as cold as last year, we’ll once again be doing everything we can to stay warm. For this, many turn to alternative forms of heating such as fireplaces, space heaters, boilers, and traditional wood or pellet stoves.
Wood or pellet stoves are an increasingly popular form of alternative or supplemental heating during the cold season, but like every form of heating, they must be used with care. As the prevalence of these stoves has increased, so has the number of fires caused by their misuse or improper installation and maintenance. If you plan on heating your home with a wood or pellet stove, make sure you take the necessary precautions by following the tips below:
- Install the stove in a central room to maximize heating effectiveness.
- Make sure your stove and chimney are Underwriters Laboratories tested and approved.
- Hire a professional chimney sweep to keep the chimney’s flue and stove pipe clean and remove any blockages, oils, or creosote that may have built up.
- Test smoke and carbon monoxide detectors in your home, especially in the room where the stove is located.
- Use only the fuel type (wood, corn, pellets, coal, etc.) the stove is specifically designed to burn.
- If you are using wood, make sure it is dry and well-seasoned.
- Non-flammable floor protection such as tile should extend out at least 18 inches on all sides of the stove.
- Always keep flammable materials away from any heating source.
- Never use liquid fuel such as kerosene in a stove.
- Prevent small children and pets from getting too close to the stove by putting up a non-flammable safety gate.
- Run the stove only when your home is occupied.
- Check the charge on your fire extinguisher to make sure it is full and ready to use in case of emergency.
Before installing a new stove in your home, check to make sure the installation will comply with your local fire and building codes and always hire a licensed and insured installer.